Sjabloon:Chemiekas

Hierdie Sjabloon bevat inligting in verband met chemiese verbindings.

Gebruik

Kopieër die Sjabloon van een van die vorms hieronder na die begin van die dokument, en vul die inligting in. Dis nie noodsaaklik om al die velde in te vul nie, selfs net die basiese sal baie help.

Algemeen:

• Moet nie velde waarvan jy nie die data ken uitvee nie, lee velde sal nie 'n ry gee nie, en afdelings sonder data sal nie verskyn nie. Ander mense kan die leë velde invul. Jy kan afdelings uitvee wat nie toepaslik is op die verbinding nie (sien Aanvullende afdelings/velde)

Kry 'n chemiekas

Die chemiekas het 'n modulere ontwerp. Dit bestaan uit verskeie afdelings, en afhangende van die verbinding kan sekere afdelings verwyder word en ander bygevoeg.

If the box needs expansion from another field, simply copy the afdeling from the full template form, and paste it into the chemiekas (make sure that each afdeling has it's own number, note that a afdeling starts with "| afdeling# = {{chemiekas " and ends with "}}"; make sure the afdelings don't 'nest'). Daar is 15 afdelings beskikbaar (nog net 8 is so ver gedefinieër).

Die volgorde van afdeling nommers het 'n invloed op die orde in die finale dokument. As 'n chemiese verbinding bv. beide a plofstof en medisyne is, maar die medisinale eienskappe is belangriker, oorweeg dit om die medisyne-afdeling 'n laer afdelingnommer te gee dan sal die medisinale-afdeling bo die plofstof-afdeling verskyn. Die nommer self maak nie saak nie, solank dit net tussen 1 en 15 is en geen duplikate voorkom nie.

Beskikbare subst sjablone (tik {{subst:chemiekas subst}} in die dokument en druk stoor, om 'n leë chemiekas te kry):

• {{chemiekas subst}} - vir standaard chemikalië
• {{chemiekas subst medium}} - 'n bietjie meer inligting
• {{chemiekas subst vol}} - 'n volledige lys

Gespesialiseerd:

• {{chemiekas subst Farmakologie}} - 'n medium box met farmakologiekas
• {{chemiekas subst plofstof}} - 'n medium box met plofstofkas

Klein/Eenvoudige Vorm

Om te gebruik, Kopieër en plak die linker kolom in die dokument of tik {{subst:chemiekas subst}} en druk stoor om 'n leë chemiekas te kry:

{{Chemiekas | ImageFile = | ImageSize = | IUPACNaam = | AnderName = | afdeling1 = {{Chemiekas Identifiseerders | CASNo = | PubChem = | SMILES = }} | afdeling2 = {{Chemiekas Eienskappe | formule = | MolereMassa = | Voorkoms = | Digtheid = | Smeltpunt = | Kookpunt = | Oplosbaarheid = }} | afdeling3 = {{Chemiekas Gevare | Hoofgevare = | FlitsPunt = | Spontaneontbranding = }} }}

Volledige Vorm

Om te gebruik, Kopieër en plak die linker kolom in die dokument of tik {{subst:chemiekas subst vol}} en druk stoor om 'n leë chemiekas te kry:

{{Chemiekas | ImageFile = | ImageSize = | IUPACNaam = | SystematieseNaam = | AnderName = | afdeling1 = {{Chemiekas Identifiseerders | Afkortings = | CASNo = | EINECS = | EINECSCASNO = | PubChem = | SMILES = | InChI = | RTECS = | MeSHName = | ChEBI = | KEGG = | ATCCode_prefix = | ATCCode_suffix = | ATC_Supplemental =}} | afdeling2 = {{Chemiekas Eienskappe | formule = | MolereMassa = | Appearance = | Digtheid = | Smeltpunt = | Melting_notes = | Kookpunt = | Boiling_notes = | Oplosbaarheid = | SolubleOther = | Solvent = | LogP = | Stoomdruk = | HenryKonstante = | AtmosphericOHRateConstant = | pKa = | pKb = }} | afdeling3 = {{Chemiekas Struktuur | CrystalStruct = | Coordination = | MolShape = }} | afdeling4 = {{Chemiekas Termochemie | DeltaHf = | DeltaHc = | Entropy = | HeatCapacity = }} | afdeling5 = {{Chemiekas Farmakologie | AdminRoutes = | Bioavail = | Metabolism = | HalfLife = | ProteinBound = | Excretion = | Legal_status = | Legal_US = | Legal_UK = | Legal_AU = | Legal_CA = | PregCat = | PregCat_AU = | PregCat_US = }} | afdeling6 = {{Chemiekas Plofstof | ShockSens = | FrictionSens = | ExplosiveV = | REFactor = }} | afdeling7 = {{Chemiekas Gevare | EUClass = | EUIndex = | MainHazards = | NFPA-H = | NFPA-F = | NFPA-R = | NFPA-O = | RPhrases = | SPhrases = | RSPhrases = | FlashPt = | Autoignition = | ExploLimits = | PEL = }} | afdeling8 = {{Chemiekas Verwant | OtherAnions = | OtherCations = | OtherFunctn = | Function = | OtherCpds = }} }}

Sjablone naam * filename.svg (not [[image:filename.svg]] * picture size (example: ImageSize=100px, default=200px) * the IUPAC name * the systematic name * any other name afdeling Identifiers - Standard numbers etc. * any Afkortings * CAS Number, links to eMolecules * EINECS, links to ecb; URL is http://ecb.jrc.it/esis/index.php?GENRE=ECNO&ENTREE= * also EINECS, but URL is http://ecb.jrc.it/esis/index.php?GENRE=CASNO&ENTREE= * PubChem, links to pubchem * SMILES, no link * InChI, no link * RTECS, no link * Medical Subject Headings, links to NIH * ChEBI, links to EBI * KEGG, links to genome.ad.jp * ATCCode prefix (first three characters), internal link * ATCCode suffix (last 4 characters), full ATC links to WHO C.C. * Other ATC codes (use the {{ATC}} template) afdeling Properties - Physical properties * the molecular formule * molecular weight, including unit * Its appearance * Digtheid, including unit. * Melting Point, including unit. * Notes on melting point. * Boiling Point, including unit. * Notes on boiling point. * Oplosbaarheid in water * Oplosbaarheid in other solvents, goes together with next * In which solvent it is soluble * Partition coefficient * Vapor pressure * Henry's law constant (kH) * Atmospheric OH rate constant * pKa * pKb afdeling Structure - Crystal structure information * Crystal Structure * Coordination * Molecular Shape afdeling Thermochemistry - Thermochemical properties * Delta Hf * Delta Hc * Entropy * Heat Capacity afdeling Pharmacology - Pharmacology/drug data * Admin Routes * Bioavailability * Metabolism * Half Life * Protein Bound * Excretion * Legal status * Legal status in US * Legal status in UK * Legal status in AU * Legal status in CA * Pregnacy Category * Pregnacy Category in US * Pregnacy Category in AU afdeling Explosive - Explosive properties * Shock Sensitivity * Friction Sensitivity * Explosive speed * RE Factor afdeling Hazards - Hazards * EU Class * EU Index * Main Hazards * NFPA-H - Health * NFPA-F - Fire * NFPA-R - Reactivity * NFPA-O - one of the values W, OX, COR, ALK, ACID, CRYO, RA, or empty * RPhrases - use the {{R}} template for this * SPhrases - use the {{S}} template for this * RSPhrases - or use the combination of the two above * Flash Point * Autoignition * Explosion Limits * PEL afdeling Related - Related compounds etc. * Other Anions * Other Cations * Other Function - works with the next field * Function - the function * Other Compounds - chemical 'see also' afdeling -end

Medium vorm

Om te gebruik, Kopieër en plak die linker kolom in die dokument of tik {{subst:chemiekas subst medium}} en druk stoor om 'n leë chemiekas te kry:

{{Chemiekas | ImageFile = | ImageSize = | IUPACNaam = | AnderName = | afdeling1 = {{Chemiekas Identifiseerders | Afkortings = | CASNo = | EINECS = | PubChem = | SMILES = | InChI = | RTECS = | MeSHName = | ChEBI = | KEGG = | ATCCode_prefix = | ATCCode_suffix = | ATC_Supplemental =}} | afdeling2 = {{Chemiekas Eienskappe | formule = | MolereMassa = | Appearance = | Digtheid = | Smeltpunt = | Melting_notes = | Kookpunt = | Boiling_notes = | Oplosbaarheid = | SolubleOther = | Solvent = | pKa = | pKb = }} | afdeling7 = {{Chemiekas Gevare | EUClass = | EUIndex = | MainHazards = | NFPA-H = | NFPA-F = | NFPA-R = | NFPA-O = | RPhrases = | SPhrases = | RSPhrases = | FlashPt = | Autoignition = | ExploLimits = | PEL = }} }}

Sjablone naam * filename.svg (not [[image:filename.svg]] * picture size (example: ImageSize=100px, default=200px) * the official name * any other name afdeling Identifiers - Standard numbers etc. * any Afkortings * CAS Number, links to eMolecules * EINECS, links to ecb * PubChem, links to pubchem * SMILES, no link * InChI, no link * RTECS, no link * Medical Subject Headings, links to NIH * ChEBI, links to EBI * KEGG, links to genome.ad.jp * ATCCode prefix (first three characters), internal link * ATCCode suffix (last 4 characters), full ATC links to WHO C.C. * Other ATC codes (use the {{ATC}} template) afdeling Properties - Physical properties * the molecular formule * molecular weight, including unit * Its appearance * Digtheid, including unit. * Melting Point, including unit. * Notes on melting point. * Boiling Point, including unit. * Notes on boiling point. * Oplosbaarheid in water * Oplosbaarheid in other solvents, goes together with next * In which solvent it is soluble * pKa * pKb afdeling Gevare - Gevare * EU Class * EU Index * Main Hazards * NFPA-H - Health * NFPA-F - Fire * NFPA-R - Reactivity * NFPA-O - one of the values W, OX, COR, ALK, ACID, CRYO, RA, or empty * RPhrases - use the {{R}} template for this * SPhrases - use the {{S}} template for this * RSPhrases - or use the combination of the two above * Flits punt * Autoignition * Explosion Limits * PEL -end

Advanced fields in main template

There are some extra fields available:

| Reference =

* Can be used for a reference, include <ref> </ref>'s with the reference, and add a <references /> to the document.

Advanced and explanations

"Table creep"

The chemiekas can handle a lot of parameters, and new ones can easily be added (even more than are shown in the full format). This may result in huge tables in the end. When the table becomes too big, please consider creating a data page 'pagename (data page)', and moving data into that page. chemiekas will automagically recognise the existence of the data page, a new box will show, which will have some links into the data page.

Veld orde

The order of the parameters in this template does not have any effect on the final layout of the template, that order is either programmed in this template (for the top afdeling) or in the following subtemplates:

• {{Chemiekas Identifiseerders}}
• {{Chemiekas Eienskappe}}
• {{Chemiekas Struktuur}}
• {{Chemiekas Termochemie}}
• {{Chemiekas Farmakologie}}
• {{Chemiekas Plofstof}}
• {{Chemiekas Gevare}}
• {{Chemiekas Verwant}}

And the hidden template:

• {{Chemiekas aanvulling}} (only visible when 'pagename (data page)' exists)

The order of the afdelings can be changed by changing the numbering of the headings 'afdeling# = {{chemiekas afdeling'. This has to be done with some care. afdelings that are really without use can be safely removed, renumbering is not necessary.

Aanvullende afdelings/velde

The setup of the chemiekas is modular, one can easily incorporate other boxes in the chemiekas, by adding a afdeling. The following afdelings are available (see these templates for more explanation):

• {{Chemiekas Identifiseerders}}
• {{Chemiekas Eienskappe}}
• {{Chemiekas Struktuur}}
• {{Chemiekas Termochemie}}
• {{Chemiekas Farmakologie}}
• {{Chemiekas Plofstof}}
• {{Chemiekas Gevare}}
• {{Chemiekas Verwant}}

Besides the fields that have been defined in the two forms above, there are many other fields available. In this template those are extra image fields (described below), in the separate afdelings there are also more fields available. For a full list of available fields see the different afdeling templates.

Parameter display

Except for the more complicated parameters, the display of most parameters is controlled by their own template. This template creates the actual row (if it is displayed is controlled by the afdeling template).

Example:

• The parameter "CASNo" -> {{chemiekas CASNo}}
• The parameter "MolereMassa" -> {{chemiekas MolereMassa}}
• The combination parameters ATCCode/ATCCode_prefix/ATCCode_suffix/ATCCode_supplemental are controlled by {{chemiekas ATCCode}}

Auto images

If there is an image available with the name of the page, that will automagically be used in the template when no other image name is supplied. The order of preference is:

1. If an imagename is supplied in any of the 8 imagefields in the chemiekas, then the automatic image will NOT be used.
2. otherwise, 'pagename.svg' will be used if available
3. otherwise, 'pagename.png' will be used if available
4. otherwise, 'pagename.gif' will be used if available
5. otherwise, 'pagename.jpg' will be used if available
6. otherwise, if there is no image available, the document will be autocategorised in Category:Chemical pages needing a structure drawing (handled by chemistry, image request)

The size of the automagic images is defaulted to 200px, but can be set with the parameter ImageSize.

Extra images

The chemiekas comes standard with one image 'ImageFile' (with a size parameter 'ImageSize'). For certain chemicals more pictures are needed, for which the parameters 'ImageFile1', 'ImageFile2', and 'ImageFile3' are available (each has his own Size-parameter 'ImageSize1', 'ImageSize2', and 'ImageSize3'). The default size for the pictures is set to 200px, normally the ImageSize does not have to be supplied. So a header could look like this:

{{Chemiekas | ImageFile = Furfural structure.png | ImageSize = 100px | ImageFile1 = Furfural-3D-vdW.png | ImageSize1 = 150px | IUPACNaam = voorbeeld ...

Chemiekas IUPAC naam Sjabloon:Instortende lys Ander name hfgdf Hierdie sjabloon gebruik ingewikkelde (en: intricate) eienskappe van sjablon sintaks. U word aangeraai om uself te vergewis van die opstel daarvan en die gebruik van parser functions voor u die sjabloon wysig. Indien u wysiging onbeplande probleme veroorsaak, maak dit asseblief so gou moontlik ongedaan (undo), aangesien hierdie sjabloon op 'n groot aantal bladsye mag voorkom. Onthou dat u nie eksperimente hier kan doen nie, en dat alle verbeteringe in of die Wikipedia:Sandput of u eie gebruikerspasie getoets moet word voor enige wysigings hier aangebring word. Usage This box is used as a module in the {{chembox}}. This template does not have any parameters, it only shows output if "pagename (data page)" exists. See also Category:Chembox templates

Buiten waar anders vermeld word data vir materiale aangegee by hulle standaardtoestande (teen 25 °C,  100 kPa)]] Inligtingskas voorbehoude en verwysings

This gives two images, each image on his own row (note, ImageFile is the first image, ImageFile1 is the second).

For some chemicals pictures can be really small, and then a side-by-side display is often nicer. chemiekas provides two rows which each can contain two images. For these there are the parameters 'ImageFileL1' and 'ImageFileR1' (left and right) for the first row, and 'ImageFileL1' and 'ImageFileR1' for row 2. Each has again his own size-parameter 'ImageSizeL1', 'ImageSizeR1', 'ImageSizeL2', and 'ImageSizeR2'. The header now looks like:

{{chemiekas | ImageFileL1 = Furfural structure.png | ImageSizeL1 = | ImageFileR1 = Furfural-3D-vdW.png | ImageSizeR1 = | IUPACNaam = voorbeeld ...

Chemiekas IUPAC naam Sjabloon:Instortende lys Hierdie sjabloon gebruik ingewikkelde (en: intricate) eienskappe van sjablon sintaks. U word aangeraai om uself te vergewis van die opstel daarvan en die gebruik van parser functions voor u die sjabloon wysig. Indien u wysiging onbeplande probleme veroorsaak, maak dit asseblief so gou moontlik ongedaan (undo), aangesien hierdie sjabloon op 'n groot aantal bladsye mag voorkom. Onthou dat u nie eksperimente hier kan doen nie, en dat alle verbeteringe in of die Wikipedia:Sandput of u eie gebruikerspasie getoets moet word voor enige wysigings hier aangebring word. Usage This box is used as a module in the {{chembox}}. This template does not have any parameters, it only shows output if "pagename (data page)" exists. See also Category:Chembox templates

Buiten waar anders vermeld word data vir materiale aangegee by hulle standaardtoestande (teen 25 °C,  100 kPa)]] Inligtingskas voorbehoude en verwysings

This gives one row with two images. Note that ImageFile is now not supplied.

Combinations are also possible, the order in the template is: 'ImageFile', 'ImageFile1', 'ImageFileL1', 'ImageFileR1', 'ImageFile2', 'ImageFile3', 'ImageFileL2', 'ImageFileR2'. This gives the possibility to play a bit with which image is first (rows with empty parameters are not displayed). Example:

{{chemiekas | ImageFileL1 = Furfural structure.png | ImageSizeL1 = | ImageFileR1 = Furfural-3D-vdW.png | ImageSizeR1 = | ImageFile2 = Water droplet blue bg05.jpg | ImageSize2 = | IUPACNaam = voorbeeld ...

Chemiekas IUPAC naam Sjabloon:Instortende lys Hierdie sjabloon gebruik ingewikkelde (en: intricate) eienskappe van sjablon sintaks. U word aangeraai om uself te vergewis van die opstel daarvan en die gebruik van parser functions voor u die sjabloon wysig. Indien u wysiging onbeplande probleme veroorsaak, maak dit asseblief so gou moontlik ongedaan (undo), aangesien hierdie sjabloon op 'n groot aantal bladsye mag voorkom. Onthou dat u nie eksperimente hier kan doen nie, en dat alle verbeteringe in of die Wikipedia:Sandput of u eie gebruikerspasie getoets moet word voor enige wysigings hier aangebring word. Usage This box is used as a module in the {{chembox}}. This template does not have any parameters, it only shows output if "pagename (data page)" exists. See also Category:Chembox templates

Buiten waar anders vermeld word data vir materiale aangegee by hulle standaardtoestande (teen 25 °C,  100 kPa)]] Inligtingskas voorbehoude en verwysings

This gives one row with two images, and one row with one image.

Troubleshooting

• When supplying a parameter with a value, and nothing or the wrong value shows up, check:

• Is the parameter placed in the correct afdeling?
• Is the parameter supplied twice? It will use the value of the second instance
• Are the afdelings properly defined. afdelings start with | afdeling# = {{chemiekas afdelingname |" and end with "}}".
• Is there inconsistency in the afdelingnumbering? Available numbers for afdelings are 1 - 15, do not use a afdelingnumber twice, that will only result in the second afdeling showing up.
• Is the capitalisation of the parameter correct? "formule" works, "formule" does not.

Adding a parameter

To add a new parameter to the chemiekas:

1. Select the afdeling the parameter has to go into, and select a unique parameter name in that afdeling.
2. Edit the afdeling.
3. In the very first if-statement, add "{{{Yourparametername|}}}" to the list, this will make sure that when the parameter is supplied, the afdeling will show. If the new parameter is not in that list, but is the only parameter is not supplied in that afdeling in a document, the afdeling will not show.
4. Add a line for the parameter, follow the example of one of the other lines.
5. Create a new template "chemiekas yourparametername", this template formats one complete row in the chemiekas (it uses the normal format for a row in a wikitable).

The actual template is in this afdeling

To get an editbox for only the template, click edit on this afdeling.

Chemiekas
IUPAC naam	Sjabloon:Instortende lys
	Hierdie sjabloon gebruik ingewikkelde (en: intricate) eienskappe van sjablon sintaks. U word aangeraai om uself te vergewis van die opstel daarvan en die gebruik van parser functions voor u die sjabloon wysig. Indien u wysiging onbeplande probleme veroorsaak, maak dit asseblief so gou moontlik ongedaan (undo), aangesien hierdie sjabloon op 'n groot aantal bladsye mag voorkom. Onthou dat u nie eksperimente hier kan doen nie, en dat alle verbeteringe in of die Wikipedia:Sandput of u eie gebruikerspasie getoets moet word voor enige wysigings hier aangebring word.

Usage

This box is used as a module in the {{chembox}}. This template does not have any parameters, it only shows output if "pagename (data page)" exists.

See also

Category:Chembox templates

Buiten waar anders vermeld word data vir materiale aangegee by hulle standaardtoestande (teen 25 °C,  100 kPa)]] Inligtingskas voorbehoude en verwysings