Lêer:Flag of the Philippines (construction sheet).svg

Page contents not supported in other languages.
in Wikipedia, die vrye ensiklopedie

Oorspronklike lêer ‎(SVG-lêer, normaalweg 1 290 × 690 piksels, lêergrootte: 17 KG)

Hierdie lêer kom vanaf Wikimedia Commons en kan ook in ander projekte gebruik word. Die beskrywing op die lêer se inligtingsblad word hieronder weergegee.

Opsomming

Beskrywing
English: Flag of the Philippines — construction sheet
Datum
Bron

Eie werk. Geometry and dimensions obtained from:

1. The maximum length of the flag is twice its width; the minimum length is twice the altitude of the equilateral triangle.

2. Any side of the equilateral triangle is as long as the width of the flag.

3. (See accompanying illustration.) Solid golden sunburst without any markings―Sun with eight rays, equally spaced; Arc x with Sun ray = Free arc y; two opposite rays in horizontal axis and two in vertical axis; sun’s diameter D=w/5; each ray has one major beam, twice as broad as the minor beam on either side; length of major beam R=5/9 D; length of minor beam r = 4/5 R.

4. Three five-pointed golden stars of equal size, each star with one point directed to the vertex of the angle enclosing it; diameter of circumscribed circle of each star = 5/9 D diameter of inscribed circle of each star = 2/9 D; distance from each corner = D/2.

— relevant portion of text from Executive Order No. 23

Note: The text in the executive order does not provide the location for the centre of the sun, but the drawing provides enough information to calculate it.

Note: The government created another specification drawing in 1955; some of the listed dimensions appear to conflict with the 1936 executive order. It is assumed that the 1936 executive order takes precedence over the 1955 drawing.
Outeur MapGrid

Notes

units

For the purpose of these notes, a unit corresponds to the units used in this construction sheet. One unit is 1/90 the width of the flag or 1/180 the length of the flag.

the sun

  1. Diameter of the central disk: D = 90/5 = 18 units.
  2. Length of major rays: R = (5/9) × D = 10 units. Distance between two opposite tips is R+D+R = 10+18+10=38 units.
  3. Length of minor rays: r = (4/5) × R = 8 units. Distance between two opposite minor tips is r+D+r = 8+18+8=34 units.
  4. Distance from left edge of flag to left most ray on sun is D/2 = 9 units as shown on the 1936 drawing. Therefore distance from left edge of flag to sun center is D/2 + R + D/2 = 28 units.
  5. It is apparent that the designers of the flag wanted the rays of the sun to appear as though they were clipped by two squares (or a square and a diamond... or an 8/2 regular star polygon). However, if the flag is drawn to spec, and one superimposes a square by connecting the tips of four opposite major rays, then the minor rays will protrude 0.0519779424 units outside of the square. This is about 0.06% of the width the flag and not generally noticeable to the naked eye. This construction sheet has a pair of red dashed squares connecting the major rays and a set of green dashed lines connecting the minor rays. It is necessary to zoom in to a high magnification level to see that these are actually distinct lines.

the stars

  1. The three stars are all the same size. They are not 5/2 regular star polygons (pentagrams) and therefore they must be drawn using all 10 points.
  2. Inner diameter of each star: (2/9) × D = 4 units
  3. Outer diameter of each star: (5/9) × D = 10 units.
  4. Each star is positioned such that one point is directed to the closest vertex of the white triangle.
  5. Distance between each triangle vertex and the tip of the closest star: D/2 = 9. Therefore the distance from triangle vertex to star center is 9 + (10/2) = 14 units.

Lisensiëring

Public domain Ek, die outeursreghouer van hierdie werk, stel dit hiermee in die publieke domein vry. Dit geld wêreldwyd.
In sommige lande is dit dalk nie wettiglik moontlik nie. Indien so:
Ek verleen aan enigiemand die reg om hierdie werk te gebruik vir enige doel, sonder voorwaardes, tensy sulke voorwaardes deur die wet vereis word.
Insignia This image shows a flag, a coat of arms, a seal or some other official insignia. The use of such symbols is restricted in many countries. These restrictions are independent of the copyright status.

Captions

Add a one-line explanation of what this file represents

Items portrayed in this file

uitbeelding

MIME type Engels

image/svg+xml

Lêergeskiedenis

Klik op die datum/tyd om te sien hoe die lêer destyds gelyk het.

Datum/TydDuimnaelDimensiesGebruikerOpmerking
huidig04:28, 17 Januarie 2023Duimnaelskets vir weergawe vanaf 04:28, 17 Januarie 20231 290 × 690 (17 KG)MapGridAdded an opaque background. No change to flag geometry.
02:52, 15 Desember 2021Duimnaelskets vir weergawe vanaf 02:52, 15 Desember 20211 290 × 690 (17 KG)MapGridYet another font tweak.
00:15, 15 Oktober 2021Duimnaelskets vir weergawe vanaf 00:15, 15 Oktober 20211 290 × 690 (17 KG)MapGridminor font and color tweaks
21:55, 24 September 2021Duimnaelskets vir weergawe vanaf 21:55, 24 September 20211 290 × 690 (17 KG)MapGridSet length of minor rays to exactly 8.000 units as per spec.
22:50, 23 September 2021Duimnaelskets vir weergawe vanaf 22:50, 23 September 20211 290 × 690 (18 KG)MapGridUploaded own work with UploadWizard

Die volgende bladsy gebruik dié lêer:

Globale lêergebruik

Die volgende ander wiki's gebruik hierdie lêer:

Metadata

Die lêer bevat aanvullende inligting wat moontlik deur 'n digitale kamera of skandeerder bygevoeg is.

As die lêer verander is, sal sekere inligting dalk nie meer ooreenkom met dié van die gewysigde lêer nie.

Ontsluit van "https://af.wikipedia.org/wiki/Lêer:Flag_of_the_Philippines_(construction_sheet).svg"