Sjabloonbespreking:Inligtingskas stad/gebruik

Page contents not supported in other languages.
in Wikipedia, die vrye ensiklopedie

Gebruik[wysig bron]

  • Belangrik: Plaas asseblief alle numeriese waardes in 'n ongeformateerde styl (bv. sonder spasies) en dui desimale plekke met 'n punt aan (dit sal met 'n komma vertoon). Verwysings en voetnotas moet asseblief by die respektiewelike parameters bygevoeg word. Numeriese waardes wat nie ongeformateerd is nie mag 'n "Expression error" veroorsaak. Ongeformateerde waardes sal outomaties deur die sjabloon geformateer word. Indien enige probleme met enige iets opduik, moet daar dadelik melding van gemaak word op die sjabloon se besprekingsblad

Hieronder is 'n voorbeeld van die gehele sjabloon se leë sintaks en dan 'n meer basiese vorm met minder parameters. Daarna volg 'n verduideliking van al die parameters (sien Sjabloonbespreking:Inligtingskas_stad/gebruik#Tabel.

Volledige leë sintaks[wysig bron]

{{Inligtingskas stad
<!-- Basiese inligting  ---------------->
|naam                   =  <!-- ten minste een van die eerste twee velde moet ingevul word -->
|amptelike_naam         = 
|ander_naam             =
|inheemse_naam           =  <!-- indien anders as die Afrikaanse naam -->
|bynaam             = 
|soort_vestiging        = <!--soos dorp, stad, ens.-->
|totaal_soort            = <!--om 'n nie-standaard naam vir die totale oppervlakte en bevolkingrye te stel (bv. Greater London). -->
|leuse                 =
|translit_taal1= <!-vir byvoorbeeld vir 'n naam wat uit Russies of Sjinees getranslitereer word-->
|translit_taal1_tipe=
|translit_taal1_info=
|translit_taal1_tipe1=
|translit_taal1_info1=
|translit_taal1_tipe2=
|translit_taal1_info2=
|translit_taal1_tipe3=
|translit_taal1_info3=
|translit_taal1_tipe4=
|translit_taal1_info4=
|translit_taal1_tipe5=
|translit_taal1_info5=
|translit_taal1_tipe6=
|translit_taal1_info6=
|translit_taal2=
|translit_taal2_tipe=
|translit_taal2_info=
|translit_taal2_tipe1=
|translit_taal2_info1=
|translit_taal2_tipe2=
|translit_taal2_info2=
|translit_taal2_tipe3=
|translit_taal2_info3=
|translit_taal2_tipe4=
|translit_taal2_info4=
|translit_taal2_tipe5=
|translit_taal2_info5=
|translit_taal2_tipe6=
|translit_taal2_info6=
<!-- beelde en kaarte  ----------->
|beeld_stasprofiel = 
|beeld_wydte = 
|beeld_onderskrif = 
|beeld_vlag = 
|vlag_wydte =
|beeld_seël = 
|seël_wydte =
|beeld_wapen = 
|wapen_wydte =
|beeld_embleem =
|embleem_soort = <!--Kenteken, logo, embleem, ens.-->
|embleem_wydte =
|beeld_kaart = 
|kaart_wydte =
|kaart_onderskrif =
|beeld_kaart2 =
|kaart2_wydte =
|kaart2_onderskrif =
<!-- Ligging ------------------>
|subverdeling_soort       = <!--Land-->
|subverdeling_naam       = <!--naam van land-->
|subverdeling_soort1      = <!--provinsie,ens.-->
|subverdeling_naam1      = 
|subverdeling_soort2      = 
|subverdeling_naam2      = 
|subverdeling_soort3      = 
|subverdeling_naam3      = 
|subverdeling_soort4      = 
|subverdeling_naam4      =
<!-- Kleiner dele (voorstede, ens.) en setel van regering -->
|setel_soort              =
|setel                   =
|dele_soort            =
|dele_styl            = <!-- =list (vir 'n lys), vou (vir opvoubare lys), para (vir paragraafvorm)
                               Verstek: lys tot 5 items, "vou" indien meer as 5-->
|dele                  = <!-- parts text, or header for parts list -->
|d1                     =
|d2                     = <!-- ens. tot by d50: vir aparte lyste om gelys te word--> 
<!-- Politiek ----------------->
|regering_voetnotas   =
|regeringsoort        =
|leier_titel           =
|leier_naam            =
|leier_titel1          =  <!-- for places with, say, both a mayor and a city manager -->
|leier_naam1           =
|leier_titel2          =
|leier_naam2           =
|leier_titel3          =
|leier_naam3           =
|leier_titel4          =
|leier_naam4           =
|gevestig_titel      =  <!-- Settled -->
|gevestig_datum       = 
|gevestig_titel1     =  <!-- Incorporated (town) -->
|gevestig_datum1      = 
|gevestig_titel2     = <!-- Incorporated (city) --> 
|gevestig_datum2      = 
|gevestig_titel3     =  
|gevestig_datum3      =
|grondlegger               =
|vernoem_na             =
<!-- Area    --------------------->
|area_grootte         = <!-- use only to set a special wikilink --> 
|eenheid_verkies                = <!--Enter: Imperial, to display imperial before metric-->
|area_voetnotas           =
|area_totaal_km2          = <!-- ALL fields with measurements are subject to automatic unit conversion-->
|area_land_km2            = <!--See table @ Template:Infobox Settlement for details on unit conversion-->
|area_water_km2           =
|area_totaal_dunam         = <!--Used in Middle East articles only-->
|area_totaal_myl2         =
|area_land_myl2          =
|area_water_myl2          =
|area_water_persent       =
|area_stedelik_km2           =
|area_stedelik_myl2          =
|area_metro_km2           =
|area_metro_myl2         =
|area_blanko1_titel        =
|area_blanko1_km2          =
|area_blanko1_myl2        =
<!-- Elevation -------------------------->
|elevation_footnotes    =  <!--for references: use <ref> </ref> tags-->
|elevation_m            = 
|elevation_ft           =
|elevation_max_m            = 
|elevation_max_ft           =
|elevation_min_m            = 
|elevation_min_ft           =
<!-- Population   ----------------------->
|population_as_of               =
|population_footnotes           =
|population_note                =
|population_total               =
|population_density_km2         = <!--For automatic calculation, any density field may contain: auto -->
|population_density_sq_mi       =
|population_metro               =
|population_density_metro_km2   =
|population_density_metro_sq_mi =
|population_urban               =
|population_density_urban_km2   =
|population_density_urban_sq_mi =
|population_blank1_titel        =
|population_blank1              =
|population_density_blank1_km2 =   
|population_density_blank1_sq_mi =
<!-- General information  --------------->
|timezone               = 
|utc_offset             = 
|timezone_DST           = 
|utc_offset_DST         = 
| coor_type             = <!-- can be used to specify what the coordinates refer to -->
|latd= |latm= |lats= |latNS=
|longd= |longm= |longs= |longEW=
<!-- Area/postal codes & others -------->
|postal_code_type       =  <!-- enter ZIP code, Postcode, Post code, Postal code... -->
|postal_code            =
|area_code              =
|twin1                  =
|twin1_country          =
|twin2                  =
|twin2_country          =
|twin3                  =
|twin3_country          =
|twin4                  =
|twin4_country          =
|twin5                  =
|twin5_country          =
|twin6                  =
|twin6_country          =
|twin7                  =
|twin7_country          =
|blank_naam             =
|blank_info             =
|blank1_naam            =
|blank1_info            =
|blank2_naam            =
|blank2_info            =
|blank3_naam            =
|blank3_info            =
|blank4_naam            =
|blank4_info            =
|blank5_naam            =
|blank5_info            =
|blank6_naam            =
|blank6_info            =
|website                = 
|footnotes              = 
}} 

}}


Tabel[wysig bron]

Steeds onder konstruksie

Naam en leuse[wysig bron]

Parameter Gebruik Beskrywing
naam vereis indien amptelike_naam nie ingevul is nie Die gebruiklike naam in Afrikaans
amptelike_naam vereis indien naam nie ingevul is nie Die amptelike naam in Afrikaans
ander_naam opsioneel Vir plekke met 'n vroeër of meer bekende naam (bv. Bombaai)
inheemse_naam opsioneel Indien anders as die Engelse naam. Sal onder die (amptelike) naam verskyn.
settlement_type opsioneel Enige soort kan ingetik word, soos Stad, Dorp, Gehuggie, Munisipaliteit, Reservaat, ens. Indien hier iets ingevul word sal dit onder die name vertoon, mits naam ingevul is. Kan ook gebruik word as 'n etiket vir 'n totale bevolking/area (verstek Stad) indien dit nodig is om te onderskei van Stadsgebied of Metropolitaanse gebied. Indien hierdie waardes ("stadsgebied" en "metropolitaanse gebied" nie ingevul is nie, is die etiket Totaal, tensy die totaal_soort ingevul is.
totaal_soort opsioneel Spesifiseer na watter "totaal" die oppervlak/area en bevolkingsyfers verwys, b.v. Groter Londen. Hierdie parameter plaas geniet voorrang bo die ander etikette vir totale bevolking/area. Om geen etiket te hê nie, vul gerus in &nbsp;
bynaam opsioneel Indien daar 'n bekende bynaam bestaan (bv. "The Big Apple" vir New York Stad)
leuse opsioneel Die leuse word onder die bynaam geplaas, indien die bestaan.
translit_taal1 opsioneel Die inskrywing word hier voor die woord "transliterasie" geplaas. (Byvoorbeel "Sjinese transliterasie". "Ander" is ook 'n geldige inskrywing.
translit_taal1_tipe opsioneel Skrif of alfabet wat gebruik word
translit_taal1_info opsioneel Getranslitereerde naam
translit_taal2 opsioneel Vir 'n tweede transliterasie (bv. stede wat beide 'n Tibettaanse en 'n Sjinese transliterasie het)
translit_taal2_tipe opsioneel
translit_taal2_info opsioneel

Beelde en kaarte[wysig bron]

Parameter Gebruik Beskrywing
beeld_stadsprofiel opsioneel Ten spyte van die naam hoef dit nie 'n stadsprofiel (skyline) te wees nie - enige beeld kan gebruik word. Die beeldwydte is by verstek 250px, tensy anders aangedui.
beeldwydte opsioneel Kan gebruik word om die grootte van die beeld_stadsprofiel groter of kleiner te maak. Kan handig wees om die inligtingskas self ook wyer te maak.
beeld_onderskrif opsioneel Indien teenwoordig, sal hierdie parameter 'n onderskrif onder die beeld_stadsprofiel plaas.
beeld_vlag opsioneel Vir vertoning van 'n vlag. Verstekwydte: 100px
vlag_wydte opsioneel Kan gebruik word om die wydte van die vlag meer of minder as 100px maak, soos gewens.
vlagskakel opsioneel
beeld_seël opsioneel Indien daar 'n amptelike seël is.
seëlskakel opsioneel
seël_wydte opsioneel Verstekwydte: 100px
beeld_wapen opsioneel Indien daar 'n wapen of wapenskild is.
wapenskakel opsioneel Die sjabloon behoort wapens outomaties te skakel, indien artikels daaroor bestaan. Gebruik hierdie parameter slegs indien daar nie 'n outomatiese skakel geskep word nie.
wapen_wydte opsioneel Verstekwydte: 100px
beeld_embleem opsioneel Kan gebruik word indien 'n amptelik kenteken, embleem, ens. bestaan.
embleemsoort opsioneel Om te spesifieer watter soort embleem "beeld_embleem" is (bv. kenteken, logo, ens.) Die verstek is "Embleem".
embleem_wydte opsioneel
embleemskakel opsioneel
image_map opsioneel
mapsize opsioneel
map_caption opsioneel
image_map1 opsioneel A secondary map image. The field image_map must be filled in first. Example see: Bloomsburg, Pennsylvania.
mapsize1 opsioneel
map_caption1 opsioneel
image_dot_map opsioneel A field for manually superimposing a dot over a blank map using an "X" & "Y" system. Blank maps, if available, can be found over at Wikimedia Commons. Example see: Rainbow Lake, Alberta
dot_mapsize opsioneel To change the dot map size; default is 180px.
dot_map_caption opsioneel For placing a caption under the dot map.
dot_x
dot_y
opsioneel For manually superimposing the dot left/right and up/down on the map.
pushpin_map opsioneel The naam of a location map as per Template:Location map (eg. Indonesia or Russia). The coordinate fields (eg. latd and longd) position a pushpin coordinate marker and label on the map automatically. Example see: Padang, Indonesia
pushpin_label_position opsioneel The position of the label on the pushpin map relative to the pushpin coordinate marker. Valid options are {left, right, top, bottom, none}. If this field is not specified, the default value is right.
pushpin_mapsize opsioneel Must be entered as only a number—no need for px. The default value is 250.
pushpin_map_caption opsioneel Fill out if a different caption from map_caption is desired.

Location, subverdelings, regering and Established information[wysig bron]

Field naam Usage Description
subverdeling_type opsioneel This field is almost always "Country".
subverdeling_naam opsioneel Depends on the subverdeling_type
subverdeling_type1
to
subverdeling_type4
opsioneel Can be State/Province, region, county.
subverdeling_naam1
to
subverdeling_naam4
opsioneel
seat_type opsioneel The label for the seat of regering (defaults to Seat).
seat opsioneel The seat of regering.
parts_type opsioneel The label for the smaller subverdelings (defaults to Boroughs).
parts_style opsioneel Set to list to display as a collapsible list, coll as a collapsed list, or para to use paragraph style. Default is list for up to 5 items, otherwise coll.
parts opsioneel Text or header of the list of smaller subverdelings.
p1, p2, etc. opsioneel (maximum p50) The smaller subverdelings to be listed.
regering_footnotes opsioneel If a reference(s) is available this where to put them using the <ref> </ref> tags and possibly the citing format at {{Cite web}} within the ref tags.
regering_type opsioneel Example:
leier_party opsioneel Political party of the place's leier.
leier_titel opsioneel First titel of the place's leier, e.g. Mayor
leier_naam opsioneel Tip: naams are automatically wiki-linked if an article exists; if the target is not the intended one, insert a character such as "& nbsp;" to disable the link
leier_titel1
to
leier_titel4
opsioneel
leier_naam1
to
leier_naam4
opsioneel For long lists use {{Collapsible list}}. See Halifax for an example.
established_titel opsioneel Example: First settled
established_date opsioneel
established_titel1 opsioneel Example: Incorporated (town)
established_date1 opsioneel
established_titel2 opsioneel Example: Incorporated (city)
established_date2 opsioneel
established_titel3 opsioneel
established_date3 opsioneel
founder opsioneel The naam of the settlement's founder
naamd_for opsioneel The source of the naam of the settlement (a person, a place, et cetera)

Geographic information[wysig bron]

These fields have dual automatic unit conversion meaning that if only metric values are entered, the imperial values will be automatically converted and vice versa. If an editor wishes to over-ride the automatic conversion, e.g. if the source gives both metric and imperial or if a range of values is needed, they should enter both values in their respective fields.
Field naam Usage Description
unit_pref opsioneel To change the unit order to imperial (metric), enter imperial. The default display style is metric (imperial). However, the template will swap the order automatically if the subverdeling_naam equals some variation of the U.S. or the UK.
For the middle east, a unit preference of dunam can be entered (only affects total area).

All values must be entered in a raw format: no commas, spaces, or unit symbols. The template will format them automatically.
area_footnotes opsioneel If reference(s) are available, this is where to put them, possibly using a citing format such as {{Cite web}}, within <ref> </ref> tags.
area_magnitude opsioneel Area magnitude of total_area in terms of m². Should enter 1 E+6 for area of 1.0 km². See 1 E+6 m²
area_total_dunam opsioneel Total area in dunams, which is wiki-linked. Used in middle eastern places like Israel, Gaza, and the West Bank. Value must be entered in raw format, no commas or spaces. Auto-converted to display square kilometers and square miles if area_total_km2 and area_total_sq_mi are empty. Examples: Gaza and Ramallah
area_total_km2 opsioneel Total area in square kilometers—symbol: km², which is wiki-linked. Value must be entered in raw format, no commas or spaces. Auto-converted to display square miles if area_total_sq_mi is empty.
Deprecated naam =area_total
area_land_km2 opsioneel Land area in square kilometers—symbol: km². Value must be entered in raw format, no comms or spaces. Auto-converted to display square miles if area_land_sq_mi is empty.
Deprecated naam =area_land
area_water_km2 opsioneel Water area in square kilometers—symbol: km². Value must be entered in raw format, no comms or spaces. Auto-converted to display square miles if area_water_sq_mi is empty.
Deprecated naam =area_water
area_total_sq_mi opsioneel Total area in square miles—symbol: sq mi, which is wiki-linked. Value must be entered in raw format, no comms or spaces. Auto-converted to display square kilometers if area_total_km2 is empty.
Deprecated name =TotalArea_sq_mi
area_land_sq_mi opsioneel Land area in square miles—symbol: sq mi. Value must be entered in raw format, no comms or spaces. Auto-converted to display square kilometers if area_land_km2 is empty.
Deprecated name =LandArea_sq_mi
area_water_sq_mi opsioneel Water area in square miles—symbol: sq mi. Value must be entered in raw format, no comms or spaces. Auto-converted to display square kilometers if area_water_km2 is empty.
Deprecated name =WaterArea_sq_mi
area_water_percent opsioneel Enter the percent of water without the "%"
area_urban_km2 opsioneel
Deprecated name =area_urban
area_urban_sq_mi opsioneel
Deprecated name =UrbanArea_sq_mi
area_metro_km2 opsioneel
Deprecated name =area_metro
area_metro_sq_mi opsioneel
Deprecated name =MetroArea_sq_mi
area_blank1_titel opsioneel Example see London
area_blank1_km2 opsioneel
area_blank1_sq_mi opsioneel
area_blank2_titel opsioneel
area_blank2_km2 opsioneel
area_blank2_sq_mi opsioneel
elevation_footnotes opsioneel If reference(s) are available, this is where to put them, possibly using a citing format such as {{Cite web}}, within <ref> </ref> tags.
elevation_m opsioneel Raw number entered in meters. Will automatically convert to display elevation in feet if elevation_ft is empty. However, if a range in elevation (i.e. 5–50 m ) is desired, the editor must enter a converted range in the elevation_ft field to over-ride the automatic conversion.
Deprecated name =elevation
elevation_ft opsioneel Raw number, entered in feet. Will automatically convert to display elevation in meters if elevation_m field is empty. However, if a range in elevation (i.e. 50–500 ft ) is desired, the editor must enter a converted range in the elevation_m field to over-ride the automatic conversion.
elevation_max_m, elevation_max_ft, elevation_min_m, elevation_min_ft opsioneel Used to give highest and/or lowest elevations, if available, instead of just a single value. Example: Halifax Regional Municipality
coor_type opsioneel If needed, to specify more exactly which coordinates are given (e.g. Town Hall).
latd opsioneel Latitude degrees. Can also be used for decimal degrees.
latm opsioneel Latitude minutes
lats opsioneel Latitude seconds
latNS opsioneel Latitude North or South.
longd opsioneel
longm opsioneel
longs opsioneel
longEW opsioneel

Population infomation[wysig bron]

The density fields have dual automatic unit conversion meaning that if only metric values are entered, the imperial values will be automatically converted and vice-versa. If an editor wishes to over-ride the automatic conversion, e.g. if the source gives both metric and imperial or if a range of values is needed, they can enter both values in their respective fields. To calculate density automatically, type auto in place of any density value.
Field naam Usage Description
population_as_of opsioneel
population_footnotes opsioneel If reference(s) are available, this is where to put them, possibly using a citing format such as {{Cite web}}, within <ref> </ref> tags.
population_total opsioneel
population_density_km2 opsioneel
Deprecated name =population_density
population_density_sq_mi opsioneel
Deprecated name =population_density_mi2
population_metro opsioneel
population_density_metro_km2 opsioneel
population_density_metro_sq_mi opsioneel
Deprecated name =population_density_metro_mi2
population_urban opsioneel
population_density_urban_km2 opsioneel
population_density_urban_sq_mi opsioneel
Deprecated name =population_density_urban_mi2
population_blank1_titel opsioneel Can be used for estimates. Example: Windsor, Ontario
population_blank1 opsioneel The population value for blank1_titel
population_density_blank1_km2 opsioneel
population_density_blank1_sq_mi opsioneel
population_blank2_titel opsioneel
population_blank2 opsioneel
population_density_blank2_km2 opsioneel
population_density_blank2_sq_mi opsioneel
population_demonym Not currently available A demonym or gentilic is a word that denotes the members of a people or the inhabitants of a place. For example citizens in Liverpool are known as Liverpudlians.
population_note opsioneel A place for additional infomation such as the name of the source. See Windsor, Ontario for example.

Other infomation[wysig bron]

Field Name Usage Description
timezone opsioneel
utc_offset opsioneel
timezone_DST opsioneel
utc_offset_DST opsioneel
postal_code_type opsioneel
postal_code opsioneel
area_code opsioneel
blank_naam opsioneel Can be used for additional information such as car plates
blank_info opsioneel This is where the information for the blank_naam would go. Example see: Warsaw.
blank1_naam
to
blank6_naam
opsioneel
blank1_info
to
blank6_info
opsioneel
twin1
to
twin7
opsioneel naam of a twin city
twin1_country
to
twin7_country
opsioneel Country of the twin city
footnotes opsioneel
website opsioneel


Usage Example[wysig bron]

from Detroit, Michigan--Note Pipe characters are in front of the line of cell data, instead of at the end of the line, which simplify the spacing:

<includeonly>